3 Mašine za brizganje plastike - Arburg 370 CMD 800-325
Svi oglasi korisnika: knezevicco (oglasa: 12)
Kategorija: Industrijska oprema / Mašine za plastiku
Grad: BIH / Banja Luka
Postavljen: 25-06-2019.
Kategorija: Industrijska oprema / Mašine za plastiku
Grad: BIH / Banja Luka
Postavljen: 25-06-2019.
| Clamping unit | |
|---|---|
| Clamping force: | [telefon] kN |
| Mould opening force, max.: | [telefon] / [telefon] kN |
| Size of mould platens (h x v): | [telefon] mm x [telefon] mm |
| Distance between tie bars (h x v): | [telefon] mm x [telefon] mm |
| Mould opening stroke: | [telefon] mm |
| Mould height min.: | [telefon] mm |
| Max daylight: | [telefon] mm |
| Hydraulic ejector - stroke: | [telefon] mm |
| Ejector force forward/backward: | [telefon] kN |
| Injection unit | |
|---|---|
| Screw diameter: | [telefon] mm Arbid |
| Ls/D ratio: | [telefon] |
| Injection pressure: | [telefon] bar |
| Stroke volume: | [telefon] ccm |
| Shot weight, PS: | [telefon] g |
| Injection rate: | [telefon] ccm/s |
| Injection stroke: | [telefon] mm |
| Screw speed: | [telefon] /min |
| Nozzle pressure: | [telefon] kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | [telefon] kW |
| Installed heating capacity: | [telefon] , [telefon] kW |
| Reservoir capacity: | [telefon] ltr. |
| Ocenite oglas (0): |
